SP Series X-Rite Spectrophotometer
The SP series X-Rite spectrophotometer adopts the latest and most accurate color control technology today. The instrument integrates a variety of color measurement functions with high efficiency and high precision, ensuring that you reach the ideal value in the spot color printing process.
Features
Wide range of applications. Can be used for laboratory, factory or field operations
Easy to read. Large graphic LCD display
Quick color comparison. Allows quick measurement and comparison of two colors without the need to establish tolerances or store data
Pass/Fail mode. It can store up to 1024 standards with tolerances, which is convenient for easy pass/fail measurement
Measurement function and index. SP60 can provide the absolute value and phase difference value of the following chromaticity: L*a*b,△L*△a*△b,L*C*h°,△L*△C*△H*,△E*ab, △ECIE94 and XYZ. American ASTM E313-98 whiteness and yellowness index.
Opacity, color strength and shade classification. SP60 can measure opacity and three color strengths (performance, chroma and tristimulus). In addition, SP60 has a 555 color light function. This measurement is helpful for the color quality control of plastics, coatings or textiles.
The effect of texture and gloss. SP60 measurement at the same time includes specular reflection (true color) and excluding specular reflection (surface color) data to help analyze the influence of the surface structure of the sample on the color.
Comfortable ergonomic design. The wrist strap is matched with the hand-held body design to ensure comfortable and accurate use, and the target base plate can be flipped to improve the flexibility of measurement.
rechargeable battery. Allow remote use
Applications
It is suitable for plate making industry and various printing applications, helping to implement comprehensive color control from pre-press to workshop
Product Parameter
| Project | Parameter |
| Measurement geometry | d/8°, DRS spectrum engine, fixed aperture: 8 mm measurement area 13 mm illumination |
| Light source | Inflatable tungsten lamp |
| Type of light source | C, D50, D65, D75, A, F2, F7, F11 and F12 |
| Standard perspective | 2° and 10° |
| Receiver | Blue enhanced silicon photodiode |
| Spectral range | 400-700 nm |
| Spectral distance | 10 nm-measurement 10 nm-output |
| storage | 1024 standard and tolerance, 2000 samples |
| Measuring range | 0 to 200% reflectivity |
| measure time | About 2 seconds |
| Inter-instrument compatibility | CIE L*a*b*: Within 0.40△E*ab, measure 12 BCR |
| Average value of 11 series swatches (including specular reflection) | Maximum 0.60△E*ab to measure any color plate (including mirror measurement) |
| CMC equal value | Within 0.3△E*ab, measure the average value of 12 BCRA series color plates (including specular reflection)
Maximum 0.5△E*ab to measure any color plate (including specular reflection) |
| Short-term repeatability | Measure the white standard board, 10△E*ab (standard deviation) |
| Light source life | About 500,s000 measurements |
| power supply | Removable (Ni-MH) battery pack; 1650mAh rated voltage is 7.2VDC |
| AC adapter requirements | 100-240VAC, 50-60HZ, maximum 15W. |
| Charging time | About 4 hours-100% capacity |
| The number of measurable times after each charge | 1000 measurements in 8 hours |
Product Configuration
Calibration standard, operating manual, AC adapter and carrying case
Optional accessories
Provide optional dedicated battery charger and rechargeable battery pack
(Based on 20 measurements on the white patch)