Common troubleshooting methods for carton compression machine

Carton compression machine common faults and troubleshooting methods: testing machine faults, often shown in the computer display panel, but not necessarily software and computer faults, you should carefully analyze, pay attention to every detail, for the final troubleshooting to provide as much information as possible.
The following troubleshooting methods should be carried out in sequence:
1.Software often crashes:
Computer hardware failure. Please repair the computer according to the manufacturer’s instructions. Software failure, contact the manufacturer. Whether this situation occurs during file operation. There was an error in the file operation. There was a problem with the extracted file. Refer to the relevant document operation instructions in each chapter.
2. test force zero show confusion:
Check whether the ground wire (sometimes not) installed by the manufacturer during debugging is reliable. The environment has changed greatly. The testing machine should work in the environment without obvious electromagnetic interference. The temperature and humidity of the environment are also required. Please refer to the host manual.
3. the test force only shows the maximum:
Calibrate whether the button is pressed. Check the connections. Check whether the AD card configuration in Options is changed. Amplifier damaged, contact manufacturer.
4. the stored file cannot be found:
The software has a fixed default file extension by default, whether to enter another extension when storing. Whether the stored directory has changed.
5. The software cannot be started:
Check whether the software dongle is installed on the computer parallel port. Close other software programs and restart them. The system file of this software is lost and should be reinstalled. The system file of this software is damaged and should be reinstalled. Contact the manufacturer.
6. The printer does not print:
Check the printer instructions to see if the operation is correct. Whether the correct printer is selected.
7. other, can contact manufacturers at any time, and make a good record.
Carton compression machine is a new type of instrument which is researched and developed according to the new national standard. The instrument mainly has three functions: compressive strength test, stacking strength test and pressure standard test. The instrument adopts imported servo motor and driver, large LCD touch display screen, high-precision sensor, single-chip computer, printer and other domestic and foreign advanced components, with convenient speed regulation, simple operation, high measurement accuracy, stable performance, complete functions and other characteristics. This instrument is a large electromechanical integration test system, high reliability requirements, the design of multiple protection system (software protection and hardware protection), make the system more reliable and safer.


Post time: Dec-02-2021