OEM Supply Gas Incubator - DRK-GHP Electrothermal constant temperature incubator – Drick

Short Description:

Product Detail

Product Tags

Feedback (2)

Sticking to the principle of "Super High-quality, Satisfactory service" ,We are striving to generally be a very good business partner of you for Incubator Culture, Cabinet Incubator, Portable Rapid Pesticide Residue Tester, We warmly welcome business partners from all walks of life, expect to establish friendly and cooperative business contact with you and achieve a win-win goal.

OEM Supply Gas Incubator - DRK-GHP Electrothermal constant temperature incubator – Drick Detail:

★1. Compound door structural design,the built-in super wide-angle glass inner door is convenient for users to observe the test samples without dead angles.

★2. Patented dual chamber temperature control system, which greatly improves the uniformity of the temperature in the box

3.Standard large-screen LCD display, multiple sets of data on one screen, menu-style operation interface, easy to understand and easy to operate.

4.It adopts mirror-finished stainless steel inner tank, four corners and semi-circular arc design, easy to clean, and the spacing of the partitions in the box is adjustable.

5.Adopt JAKEL pipe flow circulation fan, unique design of air duct, create good air circulation and convection, and ensure temperature uniformity.

6.PID control mode, small fluctuations in temperature control accuracy, with timing function, the maximum time setting is 99 hours and 59 minutes.

1.Intelligent Program Controller-30-segment(此处不确定） programming function to meet the needs of complex experiments.

2.Embedded printer-convenient for customers to print data.

3.Independent limit temperature alarm system-if the limit temperature is exceeded, the heating source is forced to stop, escorting your laboratory safety.

4.RS485 interface and special software-connect to a computer, export experimental data.

Term	9050N	9080N	9160N	9270N
Voltage	AC220V 50HZ
Heating mehod	Water-jacket Type
Temperature range	RT+5~65℃
Temperature fluctuation	±0.5℃
Temperature uniformity	±0.5℃
Temperature resolution	0.1℃
Input Power	450W	650W	850W	1350W
Liner Size W×D×H(mm)	345×350×410	400×400×500	500×500×650	600×600×750
Dimension W×D×H(mm)	480×545×665	535×590×755	635×690×905	735×790×1005
Volume	50L	80L	160L	270L
Shelf distance（mm）	46	46	63	74
Standard partition/layer number	2/8	2/10	2/10	2/10
Timing range	1~9999min

Note: The performance parameter test is under no-load conditions, no strong magnetism, no vibration: ambient temperature 30℃, ambient humidity 50%RH.

Product detail pictures:

Related Product Guide:

Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for OEM Supply Gas Incubator - DRK-GHP Electrothermal constant temperature incubator – Drick , The product will supply to all over the world, such as: Lithuania, Austria, Hanover, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

Buckeye Incubator